Finance & Business

Feb 9 2020

Home depot tubs

Home depot tubs




<a target="_blank" title="Home" href="http://remmont.com/category/news/">Home</a> depot tubs-<a target="_blank" title="Home" href="http://remmont.com/category/news/">Home</a> depot tubs
Home depot tubs-See American Standard Faucet Selector. NOTE: Roughing-in dimensions and product specifications shown on reverse side of …



Home depot tubs

Home Depot Tubs

  • Viewer
  • Transcript

WILLIAMSBURG ELITE™ 5’ INTEGRAL APRON WHIRLPOOLS BY AMERICAN STANDARD HIGH GLOSS ACRYLIC WILLIAMSBURG ELITE™ 5’ INTEGRAL APRON WHIRLPOOL Comfortable bathing design with form-fitted backrest and molded-in armrests

2425E-LHO Left Hand Drain Outlet (specify White 020, Bone 021, or Linen 222)

2425E-RHO Right Hand Drain Outlet (specify White 020, Bone 021, or Linen 222) • Acrylic with fiberglass reinforcement • Integral apron with removable access panel • Integral three-sided, tiling / water retention flange • 1.5 HP self-draining pump/motor with dry run seal • Eight multi-directional and flow adjustable jets including: Two high performance Ideal-flow™ Jets Six interchangeable Flex-jets™ • Two silent air volume controls • Deck-mounted On/Off control • Complete factory installed and tested whirlpool system

2425EC-LHO Left Hand Drain Outlet (specify White 020, Bone 021, or Linen 222) 2425EC-RHO Right Hand Drain Outlet (specify White 020, Bone 021, or Linen 222) • Same as above with the StayClean™ whirlpool system featuring Antimicrobial AlphaSan® Nominal Dimensions: 60” x 32” x 21-1/2” (1524 x 813 x 546mm)

Bath Filler*: (specify finish)

Bath Drain: BATH-DRAIN (specify Chrome 002, Polished Brass 099, or Satin 295)

Custom Accessories Available: ❏ Pulse Jet Kit: PULSE-JET (two per kit, specify White 020, Bone 021, or Linen 222) ❏

Soft Jet Kit: SOFT-JET (two per kit, specify White 020, Bone 021, or Linen 222)

E-Z-Install™ Whirlpool Heater – EZHEAT-100

* See American Standard Faucet Selector

Compliance Certifications Meets or Exceeds the Following Specifications: • Underwriters Laboratories – Hydromassage Bathtubs UL 1795 • ASME A112.19.7M for Whirlpool Appliances • ANSI Z124.1 for Plastic Bathtubs • ASTM E162 for Flammability • NFPA 258 for Smoke Density

NOTE: E-Z-Install™ Whirlpool Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature.

NOTE: Roughing-in dimensions and product specifications shown on reverse side of page.

SPS 2425E-LHO/RHO Revised 6/03

© 2003 American Standard Inc.

WILLIAMSBURG ELITE™ 5’ INTEGRAL APRON WHIRLPOOLS BY AMERICAN STANDARD HIGH GLOSS ACRYLIC

10-1/4 (260mm) 3/4 (19mm)

WATER RETENTION FLANGE (3 SIDES)

FINISHED WALL SEE FITTING SPECS FOR DIMENSIONS

16 (406mm) 9 (229 mm) ON/OFF SWITCH

CUTOUT IN FLOOR FOR DRAIN

OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN 65 & 78 (1651 & 1981mm)

ACCESS TO PUMP/MOTOR THROUGH REMOVABLE FRONT ACCESS PANEL

C/L OF SHOWER ARM FINISHED WALL

1″ WATER RETENTION FLANGE (3 SIDES) C/L OF OVERFLOW 3-1/2 (89mm)

IN-LINE HEATER REMOVABLE BLANK 12 (305mm) OPT.

C/L OF VALVES C/L OF SPOUT

21-1/4 (540mm) REF. DIM

21-1/2 (546mm) ROUGH FLOOR BATH SUPPORT MATERIAL

LEVELING STRINGER NOT FOR SUPPORT

1-1/2 N.P.T.M. THREADS 1-1/2 O.D.TAILPIECE

UNDERSIDE OF DECK

GENERAL SPECIFICATIONS FOR 2425E WHIRLPOOL INSTALLED SIZE 60 x 32 x 21-1/2 (1524 x 813 x 546mm) WEIGHT 115 Lbs. (52 Kg.) WEIGHT w/WATER 574 Lbs. (258 Kg.) GAL. TO OVERFLOW 55 Gal. (208 L.) WHIRLPOOL MIN. OPERATING VOL. 45 Gal. (171 L.) BATHING WELL AT SUMP 16-1/4 x 38-1/4 (413 x 972mm) BATHING WELL AT RIM 26-1/4 x 52-1/2 (667 x 1334mm) WATER DEPTH TO OVERFLOW 15 (381mm) FLOOR LOADING 43 Lbs./Sq.Ft. (208 Kgs./Sq.m) (PROJECTED AREA) PTS. 20.8 CUBE (FT3) 35.3 WHIRLPOOL ELECTRICAL SPECIFICATIONS PUMP 1.6 HP, 9.7 AMPS,120V.

NOTES: BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUPPORT OF BATH BY SUMP BEDDING. SUPPORT AND ENCLOSING MATERIAL BY OTHERS. REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. IMPORTANT:

Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.

]]>

Home depot tubs




SOURCE: http://slidelegend.com/home-depot-tubs_5a0643fc1723dd4493462199.html


Home depot tubs Home depot tubs Home depot tubs Home depot tubs

Home depot tubs

Written by NSA


Apartment | Auto | Car | Credit | Insurance | Loan | News | Pharma | Real Estate | Rental | Travel | USA |